NAVFACENGCOM MIL-HDBK-1001/5A — NAVFACENGCOM MIL-HDBK-1001/5A Roofing and Waterproofing Guide PDF

Downloaded from https://www.everyspec.com MIL-HDBK-1001/5A Section 1: INTRODUCTION 1.1 Scope. This handbook sets forth guidelines for design of roofing, LAYOUT 1 and waterproofing systems for building construction. It covers design of new low-slope and steep roof systems, reroofing of existing buildings, and waterproofing, and dampproofing systems. 1.2 Roof Design Synthesis. Roof-system design requires a synthesis of the following factors:

a) Suitably firm and stable surface for roofing; b) Slope for drainage; c) Fire resistance (refer to MIL-HDBK-1008, Fire Protection for Facilities Engineering, Design, and Construction); d) Wind-uplift resistance; e) Thermal resistance; f) Vapor control; g) Life-cycle costing of available systems; h) Ice dams and sliding snow; i) Maintainability. 1.3 Roof-Mounted Equipment. Rooftop location of mechanical and electrical equipment should be avoided whenever practicable. Penthouses and covered ground level locations are preferred. Rooftop equipment creates many roofing problems:

a) Difficult flashing details; b) Obstruction of drainage paths; c) Increases hazardous rooftop traffic by repairment; d) Makes roofing inspection, repair, and replacement more difficult. 1.4 Climatic Conditions. Varying climatic conditions have a big impact on roofing design. Vapor retarders are usually needed in cold climates and for buildings with high interior 1