NAVFACENGCOM MIL-HDBK-1001/5A — NAVFACENGCOM MIL-HDBK-1001/5A Roofing and Waterproofing Guide PDF

Downloaded from https://www.everyspec.com MIL-HDBK-1001/5A Table 2 Minimum Slopes for Steep Roofing MATERIAL MIN. SLOPE (in./ft. (percent)) NOTES Flat Shingle Tile (clay or concrete) 5 (42) One-piece Barrel Tile (clay or concrete) 4 (33) Double-layer felt underlayment required 4-in./ft. (33 percent) slope, single layer for slope greater than 4 in./ft. (33 percent) Two-piece Shingle Tile (clay) 4 (33) Interlocking Flat-ribbed Tile (clay or concrete) 4 (33) Asphalt Shingles 4 (33) 1 layer, non-perforated saturated felt underlayment for 2-1/2-in./ft.

(21 percent) slope may be used if special precautions, described in the NRCA Steep Roofing Manual and ARMA Residential Asphalt Roofing Manual are taken. Wood Shakes and Shingles 4 (33) Metal (Corrugated Stl., Alum.) 3 (25) Refer to SMACNA Manual. Asphalt Shingles 2-1/2 (21) Requires nonperforated, (square-tab strip) saturated felt underlayment, double layered with 19-in. (483-mm) overlap and set in roofing cement. Asphalt Roll Roofing 2 (17) Requires double-coverage (exposed nails) roll, 3-in. (76-mm) top lap. Asphalt Roll Roofing 1 (8) 6-in. (152-mm) end lap, (Concealed nails) 19-in. (483-mm) selvage. Copper, Tern 1/2 (4) With double locked soldered seams.

Standing Seam, Metal 1/2 (4) Requires floating-clip design. 36