Supermicro SAS2-213EL1 — Supermicro SAS2-213EL1 Backplane User & Service Manual PDF

SAS2-213EL1 Backplane User's Guide 2-2 Front Connector and Pin Defi nitions 1. Flash Chips The fl ash chip enhances the backplane memory. 2. Expander Chips This expander chip allows the backplane to support dual ports, cascading, and failover. 3. - 5. SAS Ports SAS ports provide expander features including cascading. From bottom to top, ports are PRI_J1, PRI_J2 and PRI_J3. 6. EPP Port The EPP port is used for manufacturer's diagnostic purposes only. 7. Fan Connectors The 4-pin connectors, designated FAN1, FAN2, and FAN3, provide power to the fans. See the table on the right for pin defi nitions. 8. Backplane Main Power Connectors The 4-pin connectors are designated PWR1, PWR3 and PWR4.

They provide power to the backplane. See the table on the right for pin defi nitions. 9. Debug Connector The debug connector is designated EX- PDBG1 and is used for manufacturer's diagnostic purposes only. 10. UART Connector The UART connector is designated SMART_ UART and is used for manufacturer's diag- nostic purposes only. 11. I 2 C Connector The I 2 C connector is designated PRI_I2C. 2-2 Fan Connectors Pin# Defi nition 1 FB 2 +12V 3 Tachometer 4 NC Backplane Main Power 4-Pin Connector Pin# Defi nition 1 +12V 2 and 3 Ground 4 +5V