Supermicro SBI-7127RG-E — Figure 3-20. Re-attach I/O Plates

SBI-7127RG-E Blade Server Module User’s Manual Notes 6. The completed Front blade assembly will have the GPU cards connected to the retention brackets and to the riser card’s PCI-E connectors for the completed assembly ( Figure 3-20 ). Figure 3-20. Re-attach I/O Plates 7. (Optional) Install the SATA DOM module and its associated power cable before replacing the front assembly back on the blade module at this time. See "Hard Disk Drives" on page 4-8 for details. 8. Reattach the front blade assembly back into the blade module. Resecure it with its fourteen (14) retaining screws and screw the two retention bracket screws to the GPUs and the serverboard (see step 2. on page 3-15 ). 9.

Install the two GPU card power cables for each GPU card. One end attaches to the GPU card’s 8-pin socket, the other end attaches to the power socket on the blade module’s serverboard. 10. Replace the top cover and secure it with its one retention screw (see Figure 3-16 ). 3-18