Supermicro SBI-7127RG-E — KVM Connector

Chapter 4: Blade Module Features Power Button Each blade has its own power button so that individual blade units within the enclosure may be turned on or off independently of the others. Press the power button (#1) to turn on the blade server. The power LED (#3) will turn green. To turn off, press and hold the power button for >4 seconds and the power LED will turn orange. KVM Button KVM stands for Keyboard/Video/Mouse. With KVM, a user can control multiple blades with a single keyboard/video/mouse setup. Connect your keyboard, mouse and monitor to the USB and VGA connectors on the CMM module, then push the KVM button on the control panel of the blade module you wish to access.

LED Indicators Blade module LEDs are described below in Table 4-3 . Table 4-3. Blade Module LED Indicators a. In the event of a power failure, the N+1 Redundant Power Supply (if included in your system's configuration) picks up the system load to provide uninterrupted operation. The failed power supply should be replaced with a new one as soon as possible. KVM Connector Alternatively, you may connect a KVM cable (CBL-0218L, with a keyboard/video/mouse attached) to the KVM connector (#7) of the blade you wish to access. To switch to another blade, disconnect the cable then reconnect it to the new blade.

See the Web-based Management Utility User’s Manual on your Superblade system CD-ROM for further details on using the KVM function remotely. 4-3 LED State Description Power LED Green Amber Red Power On Standby Power Failurea KVM/UID LED (Blue) Steady On Indicates that KVM has been initialized on this blade module Flashing Serves as a UID indicator (the UID function is activated with a management program) Network LED (Green) Network LED (Orange) Flashing Green Flashing Orange Flashes on and off to indicate traffic (Tx and Rx data) on the LAN connection to this blade module. Flashes on and off to indicate traffic over the InfiniBand module (when present in the system).

System Fault LED (Red) Steady On This LED illuminates red when a fatal error occurs. This may be the result of a memory error, a VGA error or any other fatal error that prevents the operating system from booting up.