Supermicro SBI-7127RG-E — 5-3 Running Setup

Chapter 5: BIOS 3. Go to the V IRTUAL M EDIA menu and select F LOPPY I MAGE U PLOAD . 4. B ROWSE or O PEN to locate the *. img file on your desktop and select it. 5. Press the U PLOAD button and wait a few seconds for the image to upload to the CMM. 6. Once the upload finishes, turn on the blade module and press EL > to enter the BIOS setup utility. 7. In the B OOT M ENU , bring USB LS120: PEPPCMM VIRTUAL DISC 1 to the top of the boot priority list. 8. Exit while saving the changes. The blade module will boot to the virtual media (floppy image) A:\> . Note: Replace filename.rom by the actual ROM file name (such as B8DTE142.rom for example) in the command. 9. Type flash filename .rom .

5-3 Running Setup Note: Default settings are in bold text unless otherwise noted. The BIOS setup options described in this section are selected by choosing the appropriate text from the M AIN BIOS S ETUP screen. All displayed text is described in this section, although the screen display is often all you need to understand how to set the options. When you first power on the computer, the BIOS is immediately activated. While the BIOS is in control, the Setup program can be activated in one of two ways: 1. By pressing ELETE > immediately after turning the system on, or 2.

When the message Press the key to enter Setup appears briefly at the bottom of the screen during the POST, press the ELETE > key to activate the main S ETUP menu: 5-3