Supermicro SBI-7127RG-E — Table 5-12. ACPI Settings Sub-menu

Chapter 5: BIOS Table 5-11. Serial Port Console Redirection Sub-menu (Continued) Table 5-12. ACPI Settings Sub-menu 5-13 Menu Option Description Recorder Mode This setting Enables or Disables Recorder Mode. When enabled only text will be sent. This is to capture Terminal data. Resolution 100x31 This setting Enables or Disables extended terminal resolution. Legacy OS Redirection Resolution This allows you to set for legacy OSes the number of rows and columns supported for redirection. Options include 80x24 or 80x25. Putty KeyPad This setting allows you to select the funtion key and KeyPad to use on the Putty keyboard. Options include VT100, LINUX, XTERMR6, SCO, ESCN or VT400.

Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) Console Redirection Use this setting to Enable or Disable Console Redirection for Out-of-Band Management/Windows Emergency Management Services (EMS). Console Redirection Settings This submenu contains Console Redirection settings for Out-of-Band Management/Windows Emergency Management Services (EMS). Static display information for Data Bits, Parity and Stop Bits is also shown in this submenu. Out-of-Band Mgmt Port Microsoft Windows Emergency Managment Services (EMS) allows for remote managment of a Windows Server OS through a serial port. This setting allows you to specify which port to use (COM1 or COM2).

Terminal Type VT-UTF8 is the preferred terminal type for out-of-band management. The next best choice is VT100+ and then VT100. Options include ANSI (extended ASCII character set), VT100 (ASCII character set), VT100+ (extends VT100 to support color, function keys, etc.) and VT-UTF8 (uses UTF8 encoding to map Unicode characters onto one or more bytes). Bits per Second This setting selects the serial port transmission speed, which must be matched on the other side. Long or noisy lines may require lower speeds. Options include 9600, 19200, 57600 and 115200. Flow Control Flow control can prevent data loss from buffer overflow.

When sending data, if the receiving buffers are full, a ‘stop’ signal can be sent to stop the data flow. Once the buffers are empty, a ‘start’ signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals. Options include None, Hardware RTS/CTS and Software Xon/Xoff. Menu Option Description ACPI Sleep State This setting selects the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. Options include Suspend Disabled and S1 (CPU Stop Clock). High Precision Timer Use this setting to Enable or Disable the High Precision Event Timer.