Chapter 5: BIOS 5-7 IPMI Setup Table 5-15. IPMI Menu 5-15 Menu Option Description IPMI Information IPMI Firmware Revision and IPMI Status information are statically displayed at the top of this menu. System Event Log Selecting this submenu displays settings for changing the SEL Event Log configuration. SEL Components Change this setting to Enable or Disable all features of the System Event Logging during boot-up. Erase SEL Use this setting for erasing the SEL. Options are No, Yes On Next Reset and Yes On Every Reset. When SEL is Full Use this setting to choose options for reactions to a full SEL. Options include Do Nothing and Erase Immediately.
Log EFI Status Codes Use this setting to Enable or Disable logging of EFI status codes, log only error codes or only progress codes BMC Network Configuration Use this submenu to configure BMC network parameters. BMC Network Configuration Information The submenu contains static display information for the Station IP Address, Subnet Mask, Station MAC Address and Gateway IP Address. Update IPMI LAN Configuration Specify Yes or No for the BIOS to use this setting for IPMI in the next boot-up. Configuration Address Source This setting allows you to configure LAN channel parameters Statically or Dynamically (by BIOS or BMC).
Unspecified option will not modify any BMC network parameters during the BIOS phase. Options are DHCP (dynamic) or Static.