SC-B9580 User's Guide Appendix Moving when there are bumps or gaps C Plug the power plug into an outlet with a grounding (earth) connector, and then turn on the power. Use three people to move the printer and one person to move the bulk ink solution. Hold the printer at the edges, as shown in the illustration, and move so that the printer goes first in the direction you are moving. c Important: The shape of the plug varies with the region or country of sale. Use the supplied power cable only. D Perform a Print Head Nozzle Check to check for clogged nozzles.
Post-Move Installation U “How to Print a Nozzle Check Pattern” on page 72 After moving the printer, follow the steps below to ready it for use. E Execute Print Adjustments in the Settings menu. Installing after moving when there are no bumps or gaps A U “Optimizing Media Settings (Print Adjustments)” on page 47 Check that the location is appropriate for installation. U “Notes on Usage and Storage” on page 24 Installing after moving when there are bumps or gaps A Check that the location is appropriate for installation. B See the Setup Guide and perform the following procedures.
❏ Lock the casters U “Notes on Usage and Storage” on page 24 ❏ Attach the waste ink bottle B Unfold the heater if it was folded up. ❏ Level the printer Unfold it by following the steps in "When moving through a narrow space" in reverse order. ❏ Make parallel adjustments ❏ Attach the media support ❏ Connect the computer communication cable U “When moving through a narrow space” on page 114 U Setup Guide (booklet) Note the following points when unfolding the heater. If you do not have the Setup Guide on hand, you can check the Online Manual. 118