SC-B9580 User's Guide Introduction ❏ Packaging materials can be used to store media and should not be thrown away. ❏ Avoid direct sunlight. ❏ To prevent discoloration, store prints as instructed in the documentation supplied with the media. ❏ Avoid locations that are subject to direct sunlight, excessive heat, or humidity. ❏ When not in use, media should be removed from the printer, rewound, and inserted in its original packaging for storage. Leaving media in the printer for extended periods may cause it to deteriorate. ❏ Do not place exposed media directly on the floor. Media should be rewound and inserted in its original packaging for storage.
❏ Do not carry media with the media surface pressed against clothing. Handle paper in its individual packaging until just before loading the paper in the printer. Handling Media After Printing To maintain long lasting, high quality print results, note the following points. ❏ Do not rub or scratch the printed surface. If they are rubbed or scratched, the ink may peel off. ❏ Do not touch the printed surface, as this may remove the ink. ❏ Make sure printouts are completely dry before folding or stacking, otherwise discoloration or other marks may appear where the prints touch.
These marks will disappear if the prints are immediately separated and dried but will become permanent if the surfaces are not separated. 27