SC-B9580 User's Guide Introduction C to check for the latest software. Select your printer, and then click Receiving Update Notifications A Start EPSON Software Updater. B Click Auto update settings . C Select an interval for checking for updates on the printer's Interval to Check box, and then click OK . Using Web Config Provides an overview of starting the software and the functions provided. D Select the software and manuals you want to update, and then click the Install button to start the installation. Starting Procedure Start the software on a computer that is connected to the same network as the printer. A Check the printer's IP address. Confirm that the printer is ready to print.
Press (menu), and then select General Settings - all Wi-Fi/network settings - Wired LAN Status . B Start a Web browser on the computer that is connected to the printer over the network. C Enter the IP address of the printer in the address bar of the Web browser and press the Enter or Return key. Format: IPv4: https://IP address of printer/ IPv6: https://[IP address of printer]/ When Firmware Updater is displayed, the latest firmware is available. Select Firmware Updater and click the Install button to automatically start Firmware Updater and update the printer firmware. Example: IPv4: https://192.168.100.201/ IPv6: https://[2001:db8::1000:1]/ Follow the on-screen instructions.
To log on as an administrator, proceed to the next step. c Important: Do not turn off the computer or printer while updating. 33