Chapter 2: System Safety Chapter 2 System Safety 2-1 Overview This chapter provides a quick setup checklist to get your chassis up and running. Following the steps in the order given should enable you to have your chassis set up and operational within a minimal amount of time. This quick setup assumes that you are an experienced technician, famailiar with common concepts and terminology. 2-2 Warnings and Precautions You should inspect the box the chassis was shipped in and note if it was damaged in any way. If the chassis itself shows damage, file a damage claim with carrier who delivered your system. Decide on a suitable location for the rack unit that will hold that chassis.
It should be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and electromagnetic fields are generated. You will also need it placed near at least one grounded power outlet. When as- sembled, the SC111 chassis includes one power supply. 2-3 Preparing for Setup The SC111 chassis includes a set of rail assemblies, including mounting brackets and mounting screws which you will need to install the system into a rack. Please read this manual in its entirety before you begin the installation procedure. 2-1