Chapter 4: System Interface nection to the SATA backplane enables this LED to blink on and off when that particular drive is being accessed. Red: The red LED to indicate an SAS/SATA drive failure. If one of the SAS/SATA t drives fail, you should be notified by your system management software. 4-5 Power Supply LEDs Some power supplies include an LED in the rear with the following definitions: Solid Green: When illuminated, the green LED indicates that the power supply t is on. Solid Amber: When illuminated, the amber LED indicates the power supply is t plugged in and turned off, or the system is off but in an abnormal state. 4-5