Super Micro Computer, Inc. SC111T-560UB or SC111T-560CB — Super Micro SC111T-560 Chassis User Manual PDF: 1U Server Rack Solution

Chapter 5: Chassis Setup and Maintenance 5-5 DVD-ROM Drive or USB Comport Installation The SC111 chassis includes either a DVD-ROM or USB com port, which is usually pre-installed. In the unlikely event that the DVD-ROM or USB com port needs to be replaced, follow the instructions below. Installing or Replacing a DVD-ROM Drive or USB Com Port Power down the system and if necessary, remove the server from the rack. 1. When installing a device for the first time, it is necessary to remove the front 2. mini bezel (grate) from slot A (for a USB com port) or slot B (for a DVD-ROM drive). Pull the bezel forward and off the front of the chassis. (If a device was previ- 3.

ously installed, this cover may already be removed). Remove the top chassis cover and unplug the drive's power and data cables 4. from the motherboard and/or backplane. The DVD-ROM requires an additional lock screw (C) at the back of the DVD- 5. ROM drive to be removed. Remove the lock screw through the interior of the chassis and gently push the DVD-ROM drive (D), DVD-ROM adapter card (E) and drive tray out through the front of the chassis. 1 A 1 B 1 C 1 E 1 D Figure 5-4: Installing the DVD-ROM Drive 5-5