Super Micro Computer, Inc. SC111T-560UB or SC111T-560CB — Super Micro SC111T-560 Chassis User Manual PDF: 1U Server Rack Solution

SC111 Chassis Manual Installing the Motherboard Review the documentation that came with your motherboard. Become familiar 1. with component placement, requirements, and precautions. Disconnect the power supply and lay the chassis on a flat surface. 2. Open the chassis cover. 3. If necessary, remove the riser card bracket. To do this, remove the two 4. screws holding the card in place and lift the bracket from the chassis. As required by your motherboard, install standoffs in any areas that do not 5. have a permanent standoff. To do this: A. Place a hexagonal standoff screw through the bottom the chassis. B. Secure the screw with the hexagon nut (rounded side up).

Lay the motherboard on the chassis aligning the permanent and optional 6. standoffs Secure the motherboard to the chassis using the rounded, Phillips head 7. screws. Secure the CPU(s), heatsinks, and other components to the motherboard, 8. chassis, and/or backplane as needed. Riser Card Bracket (remove if necessary) Figure 5-7: Installing the Motherboard 5-8