Super Micro Computer, Inc. SC111T-560UB or SC111T-560CB — Super Micro SC111T-560 Chassis User Manual PDF: 1U Server Rack Solution

SC111 Chassis Manual Figure 5-9: Chassis with a Riser Card Installing an Expansion Card Confirm that you have the correct riser card for your chassis model and that 1. the add-on card includes a standard bracket. Remove the chassis cover. 2. Install the riser card into the riser card bracket. 3. Insert the riser card card into the appropriate slot on the motherboard. Se- 4. cure the riser card bracket to the chassis using screws as illustrated. Choose the I/O panel slot in which to place the add-on card. On that slot, 5. open the I/O panel lever and slide the I/O panel sideways. From inside the chassis, remove the I/O panel.

Slide the add-on card into the riser card and attach the add-on card bracket 6. in place of the I/O panel bracket. Secure the add-on card by closing the I/O panel lever. 7. If additional support for the add-on card is required, locate the add-on card 8. support arm on the floor of the chassis and rotate the add-on card support arm inward to support the edge of the add-on card. Connect cables to the add-on card if necessary. 9. 5-10 14 66 68