SC111 Chassis Manual Checking the Air Flow Check the Airflow Make sure there are no objects to obstruct airflow in and out of the server. In 1. addition, if you are using a front bezel, make sure the bezel's filter is replaced periodically. Do not operate the server without drives or drive trays in the drive bays. Use 2. only recommended server parts. Make sure no wires or foreign objects obstruct air flow through the chassis. 3. Pull all excess cabling out of the airflow path or use shorter cables. The control panel LEDs inform you of system status. See Chapter 3 System 4. Interface for details on the LEDs and the control panel buttons. 5-12