Super Micro Computer, Inc. SC111T-560UB or SC111T-560CB — Super Micro SC111T-560 Chassis User Manual PDF: 1U Server Rack Solution

Chapter 5: Chassis Setup and Maintenance 5-9 Replacing the Power Supply The SC111 chassis has a 560 Watt power supply. This power supply is auto- switching capable. It can automatically sense and operate at a 100v to 240v input voltage. An amber light will be illuminated on the power supply when the power is off. An illuminated green light indicates that the power supply is operating. Power Supply Failure If the power supply unit fails, the system will shut down and you will need to replace the unit. Replacement units can be ordered directly from Supermicro (see contact information in the Preface).

As there is only one power supply unit in the SC111 chassis, power must be completely removed from the server before removing and replacing the power supply unit. Figure 5-13: Removing the Power Supply Replacing the Power Supply Power down the server and unplug the power cord. Push the release tab (on 1. the back of the power supply) as illustrated. Unscrew the two screws securing the power supply to the bottom of the chas- 2. sis. Replace the failed power module with another of the same model. 3. Plug the AC power cord back into the module and power up the server. 4. 5-15