Appendix A: Chassis Cables Extending Power Cables Although Super Micro chassis are designed with to be efficient and cost-effective, some compatible motherboards have power connectors located in different areas. To use these motherboards you may have to extend the power cables to the mother boards. To do this, use the following chart as a guide. Front Panel to the Motherboard The SC111 chassis includes a cable to connect the chassis front panel to the motherboard. If your motherboard uses a different connector, use the following list to find a compatible cable. * Split cables: Use these cables if your motherboard has different pin defini- tions than a Supmicro motherboard.
A-3 Power Cable Extenders Number of Pins Cable Part # Length 24 pin CBL - 0042 7.9”(20 CM) 20 pin CBL - 0059 7.9”(20 CM) 8 pin CBL - 0062 7.9”(20 CM) 4 pin CBL - 0060 7.9”(20 CM) Front Panel to Motherboard Cable (Ribbon Cable) Number of Pins (Front Panel) Number of Pins (Motherboard) Cable Part # 16 pin 16 pin CBL - 0049 16 pin 20 pin CBL - 0048 20 pin 20 pin CBL - 0047 16 pin Split* CBL - 0068 20 pin Split* CBL - 0067