SC113 Chassis Manual 5-8 Installing the Motherboard Optional Standoffs Figure 5-7. Chassis Standoffs Permanent and Optional Standoffs Standoffs prevent short circuits by creating space between the motherboard and the chassis surface. The SC113 chassis includes permanent standoffs in locations used by most motherboards. These standoffs accept the rounded Phillips head screws included in the SC113 accessories packaging. Some motherboards require additional screws for heatsinks, general components and/or non-standard security. Optional standoffs are included for these mother boards.
To use an optional standoff, you must place the hexagonal screw through the bot tom the chassis and secure the screw with the hexagon nut (rounded side up). Compare the holes in the motherboard to those in the chassis and add or remove standoffs as needed. 5-8