Chapter 5 Chassis Setup and Maintenance WIO Riser Card Figure 5-10. Chassis with a Riser Card Installing an Expansion Card 1. Confirm that you have the correct riser card for your chassis model and the add-on card includes a standard bracket. 2. Remove the chassis cover. 3. Install the riser card onto the bracket. Insert the card and bracket into the ap propriate slot on the motherboard. Secure the riser bracket to the chassis using screws as illustrated. 4. Choose the PCI slot in which to place the add-on card. 5. In that slot, open the PCI slot panel lever and slide the PCI slot panel sideways. 6. From inside the chassis, remove the PCI slot panel panel. 7.
Slide the add-on card into the riser card and attach the add-on card bracket in place of the PCI slot panel. 8. Secure the add-on card by closing the I/O panel lever. 9. Connect cables to the add-on card if necessary. 5-11 iser Card