SC113 Chassis Manual Figure 6-5. Installing the Server into a Rack Installing the Chassis into a Rack 1. Confirm that chassis includes the inner rails and inner rail extensions. Also confirm that the outer rails are installed on the rack. 2. Align the chassis inner rails with the front of the out rails on the rack. 3. Slide the chassis rails into the rack rails, keeping the pressure even on both sides (you may have to depress the locking tabs when inserting). When the server has been pushed completely into the rack, you should hear the locking tabs click into position. 4. (Optional) Insert and tighten the thumbscrews which secure the front of the server to the rack. Stability hazard .
The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over. 6-8