Appendix A Chassis Cables Although Supermicro chassis are designed with to be efficient and cost-effective, some compatible motherboards have power connectors located in different areas. Extending Power Cables To use these motherboards you may have to extend the power cables to the moth erboards. To do this, use the following chart as a guide. The chassis includes a cable to connect the chassis front panel to the mother board. If your motherboard uses a different connector, use the following list to find a compatible cable. Front Panel to the Motherboard * Split cables: Use these cables if your motherboard has different pin definitions than a Supermicro motherboard.
A-3 Power Cable Extenders Number of Pins Cable Part # Length 24-pin CBL-0042 7.9” (20 cm) 20-pin CBL-0059 7.9” (20 cm) 8-pin CBL-0062 7.9” (20 cm) 4-pin CBL-0060 7.9” (20 cm) Front Panel to Motherboard Cable (Ribbon Cable) Number of Pins (Front Panel) Number of Pins (Motherboard) Cable Part # 16-pin 16-pin CBL-0049 16-pin 20-pin CBL-048 20-pin 20-pin CBL-0047 16-pin Split* CBL-0068 20-pin Split* CBL-0067