SC113M Chassis Manual Figure 4-5. Installing the Motherboard Installing the Motherboard Installing the Motherboard 1. Review the documentation that came with your motherboard. Become familiar with component placement, requirements, precautions, and cable connec tions. 2. Power down the system and remove the power cord from the rear of the power supply as described in Section 4-2. Open the chassis cover as de scribed in Section 4-3. 3. Compare the mounting holes in the motherboard to those in the floor of the chassis. Add or remove standoffs as needed.
To do this, place a hexagonal standoff screw through the bottom the chassis and secure the screw with a hexagon nut with the rounded side up. 4. Lay the motherboard in the chassis, aligning it with the permanent and op tional standoffs 5. Secure the motherboard to the chassis using the rounded, Phillips head screws. 6. Secure the CPU(s), heatsinks, and other components to the motherboard as described in the motherboard documentation. 7. Connect the cables between the motherboard, backplane, chassis, front pan el, and power supply, as needed. Also, the fans may be temporarily removed to allow access to the backplane ports. 4-6