SC113M Chassis Manual Riser Card Riser Card Bracket Screw Installing an Expansion Card with a Short or Full-Length Bracket Figure 4-7. Installing an Expansion Card with a Full-Length Bracket 1. Confirm that you have the correct riser card for your chassis model and that the expansion card includes a standard mounting bracket. 2. Power down the system and remove the power cord from the rear of the power supply as described in Section 4-2. Open the chassis cover as de scribed in Section 4-3. 3. Remove the screw securing the short or full-length riser card bracket to the chassis. Lift the bracket up and out of the chassis. 4. Install the riser card onto the short or full-length bracket.
Insert the card into the appropriate slot on the motherboard. Secure the bracket to the chassis using screws as illustrated. 5. Select the PCI slot in which to place the expansion card. 6. Open the PCI slot panel lever and slide the slot cover sideways to remove it. 7. Simultaneously slide the expansion card into the riser card and slide the expansion card bracket into the PCI slot. 8. Secure the expansion card by closing the PCI slot lever. 9. Connect cables to the expansion card if necessary. 10. Replace the chassis cover, plug the power cord into the rear of the power supply and power up the system. CSE-113MFAC2-605CB Figure 4-8.
Installing Expansion CSE-113MFAC2-R606CB Cards with Short-Length Brackets