Chapter 4 Chassis Setup and Maintenance 4-8 Installing the Air Shroud Figure 4-11. Air Shroud Installation Air shrouds concentrate airflow to maximize fan efficiency. The SC113M chassis air shroud does not require screws to set up. Installing the Air Shroud 1. Power down the system and remove the power cord from the rear of the power supply. Open the chassis cover as described in Section 4-3. 2. If necessary, move any cables that interfere with the air shroud placement. 3. Place the air shroud in the chassis. The air shroud fits just behind the three fans in the fan rack. Slide the air shroud into the grooves just behind the fan rack. 4.
Replace the chassis cover, plug the power cord into the rear of the power supply and power up the system. 4-11