Supermicro SC113M — Supermicro SC113M Chassis Manual: User Guide & Service Information PDF

SC113M Chassis Manual 5-4 Rack Mounting Instructions This section provides information on installing the SC113M chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the instal­ lation instructions that came with the rack unit you are using. Note: This rail will fit a rack between 26" and 33.5" deep. Identifying the Sections of the Rack Rails The chassis package includes two rack rail assemblies in the rack mounting kit. Each assembly consists of two sections: an inner rail and an outer rail.

Inner Rails The inner rail comes preinstalled on the chassis and no assembly is required. Rail Locking Tabs Inner Rails (Inner rail is preinstalled) Figure 5-1. Inner Rails Locking Tabs Both chassis rails have a locking tab. The tabs lock the server into place when installed and pushed fully into the rack. These tabs also lock the server in place when fully extended from the rack. This prevents the server from coming completely out of the rack when you pull it out for servicing. Warning: do not pick up the server by the front handles. They are designed to pull the system from a rack only. 5-4