The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.0c Release Date: June 27, 2014 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2014 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America ii

Page 2

Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SC510 chassis. Installation and maintenance should be performed by experienced technicians only. Supermicro’s mini-sized SC510 1U chassis features a depth of only 11.3" with an advanced airflow and thermal design for client nodes, firewall applications, mail servers, Web servers and other server applications. The SC510 supports a wide range of single processor based Micro ATX 9.6" x 9.6" motherboards. The SC510T features dual 2.5" hot-swappable hard drive bays which permit easy upgrades and maintenance.

The SC510 is a perfect solution for home and office servers, with system noise levels at a low 30 dB during normal operation. This document lists compatible parts available when this document was published. Always refer to the our Web site for updates on supported parts and configura tions. iii

Page 3

SC510 Chassis Manual Manual Organization Chapter 1 Introduction The first chapter provides an overview of the main components and features of the SC510 chassis. This chapter also includes contact information. Chapter 2 Warning Statements for AC Systems This section lists warnings, precautions, and system safety. It is recommended that you thoroughly familiarize yourself with this chassis safety precautions. Chapter 3 Chassis Components Refer here for general information on the chassis components including the fans, airflow shields, and other equipment. Chapter 4 System Interface This chapter provides information on the system interface.

Refer here for the meanings of the LED indicators and the appropriate responses that you may need to take. Chapter 5 Chassis Setup and Installation Follow the procedures given in this chapter when installing, removing, or reconfiguring your chassis. Chapter 6 Rack Installation Refer to this chapter for detailed information on chassis rack installation. You should follow the procedures given in this chapter when installing, removing or reconfiguring your chassis into a rack environment. Appendix A Chassis Hardware Appendix B Power Supply Specifications iv

Page 4