Supermicro SC512F — Supermicro SC512F Chassis Manual: 1U Server Guide & Specs PDF

Chapter 2: System Safety l Place the chassis top cover and any system components that have been removed away from the system or on a table so that they won’t accidentally be stepped on. l While working on the system, do not wear loose clothing such as neckties and unbuttoned shirt sleeves, which can come into contact with electrical circuits or be pulled into a cooling fan. l Remove any jewelry or metal objects from your body, which are excellent metal conductors that can create short circuits and harm you if they come into contact with printed circuit boards or areas where power is present. l After accessing the inside of the system, close the system back up and connections have been made.

secure it to the rack unit with the retention screws after ensuring that all 2-6 System Safety Electrostatic discharge (ESD) is generated by two objects with different electrical neutralize this difference, which can damage electronic components and printed charges coming into contact with each other. An electrical discharge is created to circuit boards. The following measures are generally suffi cient to neutralize this difference before contact is made to protect your equipment from ESD: l Do not use mats designed to decrease electrostatic discharge as protection from electrical shock. Instead, use rubber mats that have been specifi cally designed as electrical insulators.

l Use a grounded wrist strap designed to prevent static discharge. l Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready for use. l Touch a grounded metal object before removing any board from its anti- static bag. l Do not let components or PCBs come into contact with your clothing, which may retain a charge even if you are wearing a wrist strap. l Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or contacts. l When handling chips or modules, avoid touching their pins. 2-2-3