Chassis Manual Standoffs the chassis surface. The SC512F chassis includes permanent standoffs in locations Standoffs prevent short circuits by securing space between the motherboard and used by most motherboards. These standoffs accept the rounded Phillips head screws included in the SC512F accessories packaging. Round head 3 x 5 mm [0.197] Figure 5-8: Motherboard Placement To install the motherboard: 1. Review the documentation that came with your motherboard. Become familiar with component placement, requirements, precautions, and cable connections. 2. Open the chassis cover. 3. Align the motherboard with the chassis standoffs and carefully, place the moth- erboard in the chassis.
Make sure rear ports line up with the I/O shield. 4. Secure the motherboard to the chassis using the 10 rounded, Phillips head screws supplied with the accessories kit. 5. Secure the CPU(s), heatsinks, and other components to the motherboard as described in the motherboard documentation. 6. Connect the cables between the motherboard, backplane, chassis, front panel, and power supply, as needed. 5-6