Chapter 5: Chassis Setup and Maintenance To replace chassis LED and buttons: In the unlikely event that the chassis LED and buttons fail, you can replace the panel. Replacement parts can be ordered from Super Micro or an authorized reseller. 1. Power down and unplug the system. 2. Remove the chassis cover. 3. Disconnect the cord to the front panel. 4. Locate and remove three screws holding the panel in place. (If necessary, you may have to remove the second hard drive in the SC512F-280 model.) 5. Install the new LED panel and secure the unit with three screws. 6. Re-connect the cables to the LED panel and if necessary, replace the hard drive. 5-15