Super Micro Computer, Inc. SC513 — Super Micro SC513 Chassis Manual: Comprehensive Guide for System Integrators

Chapter 5: Chassis Setup and Maintenance 5-4 Installing Hard Drives Remove five 1 5 screws 1 6 Figure 5-2: Removing the CD-ROM Drive to Access the Hard Drive Installing a Hard Drive Disconnect the chassis from any power source. 1. Open the chassis cover as described on the previous page. 2. Lift the air shroud up and out of the chassis. 3. Remove the fan tray or blower as described in section 5-7 of this manual. 4. Remove the five screws securing the hard drive cage to the floor of the chas­ 5. sis and set them aside for later use. Lift the hard drive cage up and out of the chassis 6. Warning! Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers.

For information on rec­ ommended HDDs, visit the Supermicro Web site at http://www. supermicro.com/products/nfo/storage.cfm ! 5-3