Super Micro Computer, Inc. SC513 — Super Micro SC513 Chassis Manual: Comprehensive Guide for System Integrators

Chapter 5: Chassis Setup and Maintenance 5-8 Power Supply Depending on your chassis model the SC513 chassis has a 260, 350, 410 or 420 Watt power supply. This power supply is auto-switching capable. This enables it to automatically sense and operate at a 100V to 240V input voltage. An amber light will be illuminated on the power supply when the power is off. An illuminated green light indicates that the power supply is operating. Power Supply Failure The SC513 series chassis has one power supply. In the unlikely event that the power supply unit fails, the system will shut down and you will need to replace it.

Replacement units can be ordered directly from Supermicro (see contact information in the preface) or an authorized reseller. Power Supply Remove These Screws Pan Head 6-32 x 5mm [0.197] Remove This Screw Figure 5-16: Removing the Power Supply Replacing the Power Supply Disconnect the power cord from the from the chassis to ensure that the unit is 1. not accidentally plugged in. Place the chassis on a stable hard surface and remove the chassis cover. 2. Disconnect the power supply from the motherboard and other chassis compo­ 3. nents. Remove the screws securing the power supply. Two screws are in the back 4. of the chassis and one underneath.

Retain the screws and the internal brace that connects the power supply to the chassis from underneath. 5-15