Chapter 5: Chassis Setup and Maintenance 5-9 Replacing the Front LED Panel In the unlikely event that the chassis LED or buttons fail, the front panel can be replaced. Replacement parts can be ordered from Supermicro or an authorized reseller. Replacing the front LED panel requires that the bezel be removed from the front of the chassis. Removing the Front Bezel 1 1 Figure 5-17: Front Bezel Release Tabs Removing the Bezel Locate the four front bezel release tabs on the front of the chassis. 1. 1 2 Figure 5-18: Removing the Front Bezel Gently remove the bezel from the front of the chassis by pulling it forward as 2. illustrated above. 5-17