Super Micro Computer, Inc. SC513 — Super Micro SC513 Chassis Manual: Comprehensive Guide for System Integrators

SC513 Chassis Manual Rack 1 6 Attach to Rear of Long Bracket Short Bracket Flat head M5 Screw and M5 Washer Outer Rail Round head M4 Screw 1 5 Attach to Front of Rack Round head Figure 6-3: Assembling and Installing the Outer Rails M4 Screw Installing the Outer Rails to the Rack Installing the Outer Rails Slide the short and long brackets on the outside of the outer rail. You must 1. align the pins with the slides. Both bracket ends must face the same direction. Adjust both the short and long brackets to the proper distance so that the rail 2. fits snugly into the rack. Secure the long bracket to outer rail with two M4 screws. Use a washer with 3. each screw.

Secure the short bracket to the outer rail with two M4 screws. Use a washer 4. with each screw. Attach the front of the short bracket to the front of the rack using two M5 5. screws. Attach the rear of the long bracket to the rear of the rack using two M5 6. screws. Repeat steps 1-7 for the remaining outer rail. 7. 6-6