Supermicro SC733 Chassis Manual: User & Service Guide PDF (EN)

SC733 Chassis Manual The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 2.0 Release Date: November 7, 2013 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2013 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America ii

Стр. 2

Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SC733 chassis. Installation and maintenance should be performed by experienced technicians only. Supermicro’s SC733 chassis features a unique and highly-optimized design for Intel and AMD platforms. The chassis is equipped with a 465W, 500W, or 665W high-efficiency power supply for superb power savings. This document lists compatible parts available when this document was published. Always refer to the our Web site for updates on supported parts and configura­ tions. iii

Стр. 3

SC733 Chassis Manual Manual Organization Chapter 1: Introduction The first chapter provides a checklist of the main components included with this chassis and describes the main features of the SC733 chassis. This chapter also includes contact information. Chapter 2: Standardized Warning Statements for AC/DC Systems This chapter lists warnings, precautions, and system safety. It is recommended that you thoroughly familiarize yourself installing and servicing this chassis safety precautions. Chapter 3:

System Interface Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 4: Chassis Setup and Maintenance Follow the procedures given in this chapter when installing, removing, or reconfiguring your chassis. Appendices This section lists compatible cables, power supply specifications, and compatible backplanes. Not all compatible backplanes are listed. Refer to our Web site for the latest compatible backplane information. Appendix A: Chassis Cables Appendix B: Power Supply Specifications Appendix C:

SAS-733TQ Backplane Specifications Appendix D: SATA-733 Backplane Specifications iv

Стр. 4

Preface Table of Contents Chapter 1 Introduction 1-1 Overview.......................................................................................................... 1-1 1-2 Shipping List.................................................................................................... 1-1 1-3 Where to get Replacement Components........................................................ 1-2 1-4 Contacting Supermicro.................................................................................... 1-3 1-5 Returning Merchandise for Service.................................................................

1-4 Chapter 2 Standardized Warning Statements for DC Systems 2-1 About Standardized Warning Statements........................................................ 2-1 Warning Definition............................................................................................ 2-1 Installation Instructions.................................................................................... 2-4 Circuit Breaker................................................................................................. 2-5 Power Disconnection Warning.........................................................................

2-6 Equipment Installation..................................................................................... 2-8 Restricted Area................................................................................................ 2-9 Battery Handling............................................................................................ 2-10 Redundant Power Supplies........................................................................... 2-12 Backplane Voltage......................................................................................... 2-13 Comply with Local and National Electrical Codes.........................................

2-14 Product Disposal............................................................................................ 2-15 Hot Swap Fan Warning................................................................................. 2-16 DC Power Supply ......................................................................................... 2-18 DC Power Disconnection............................................................................... 2-20 Chapter 3 System Interface Hazardous Voltage or Energy Present on DC Power Terminals................... 2-21 3-1 Overview..........................................................................................................

3-1 3-2 Control Panel Buttons...................................................................................... 3-2 3-3 Control Panel LEDs......................................................................................... 3-2 Chapter 4 Chassis Setup and Maintenance 4-1 Overview.......................................................................................................... 4-1 4-2 Removing the Chassis Cover.......................................................................... 4-2 4-3 Installing Hard Drives in the SC733i Model Chassis...................................... 4-3 4-4 Installing Hard Drives in the SC733T and SC733TQ......................................

4-5 4-5 Installing a Peripheral Drive............................................................................ 4-8 v

Стр. 5