Supermicro SC745 — Installing Expansion Cards

Chapter 3: Maintenance and Component Installation Installing Expansion Cards The system can accommodate six PCIe cards. The chassis has seven slots, but the slot nearest the chassis top is not supported by this motherboard. Expansion Card Chassis Slots Figure 3-12. PCI Slots Installing an Expansion Card 1. Power down the system and remove the cover. 2. In the rear of the chassis, push on PCI shield lock, then lift the lock. 3. Remove the screw holding the PCI shield in place and remove the shield. 4. Push the expansion card into the expansion slot on the motherboard while aligning it with the chassis slot in the rear of the chassis. 5.

Secure the expansion card shield onto the rear of the chassis with a screw and the lock. PCI Shield Lock push here PCI Shield Lock lifted Figure 3-13. Removing a Blank PCI Shield 35