Chapter 5: Chassis Setup and Maintenance Connect the cables between the motherboard, backplane, chassis, front 8. panel, and power supply, as needed. Also, fans may be temporarily removed to allow access to the backplane ports. Replace the add-on card bracket and secure the bracket with a screw. 9. Add-on Card/Expansion Slot Setup SC809 chassis includes I/O slots for add-on cards and expansion cards. Each side supports one low profile/half-length add-on card, for a total of two per system. Add-on Card Slot Clip Temporary "L" Bracket Figure 5-6: I/O Shield Placement Installing Add-on Cards Disconnect the power supply, lay the chassis on a flat surface, and open the 1. chassis cover.
Pull open the add-on card slot clip in the rear of the chassis. 2. Slide the temporary add-on card "L" bracket toward the slot clip and remove 3. the temporary bracket from the chassis. 5-7