SC809 Chassis Manual 5-6 Checking the Air Flow Checking the Server's Air Flow Make sure there are no objects to obstruct airflow in and out of the server. In 1. addition, if you are using a front bezel, make sure the bezel's filter is replaced periodically. Do not operate the server without drives or drive trays in the drive bays. Use 2. only recommended server parts. Make sure that no wires or foreign objects obstruct air flow through the chas 3. sis. Pull all excess cabling out of the airflow path or use shorter cables. The control panel LEDs inform you of the system status. See “Chapter 3 System Interface” for details on the LEDs and the control panel buttons.
Installation Complete In most cases, the chassis power supply and fans are pre-installed. If you need to install fans continue to the Systems Fan section at the end of this chapter. If the chassis will be installed into a rack, continue to the next chapter for rack installa tion instructions. 5-10