S UPER SC811 Chassis Series SC811TQ-600B SC811TQ-350B SC811L-600B SC811L-350(B) SC811TQ-520(B) SC811S-300(B) SC811S-520(B) SC811T-300(B) SC811i-520(B) SC811i-300(B) SC811TQ-441B SC811TQ-280(B) SC811S-420(B) SC811S-280(B) SC811T-420(B) SC811i-280(B) SC811i-420(B) SC811TQ-260(B) SC811S-410(B) SC811S-260(B) SC811T-410(B) SC811T-260(B) SC811i-410(B) SC811i-260(B) USER’S MANUAL 2.0a

Page 1

SC811 Chassis Manual The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www. supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material- special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 2.0a Release Date: August 26, 2013 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2013 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America ii

Page 2

Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SC811 1U chassis. Installation and maintenance should be performed by experienced technicians only. This document lists compatible parts available when this document was published. Always refer to the our Web site for updates on supported parts and configurations. iii

Page 3

SC811 Chassis Manual Manual Organization Chapter 1 Introduction The first chapter describes the main features of the SC811 chassis. This chapter also includes contact information. Chapter 2 Warning Statements for AC Systems This chapter discusses warnings, precautions, and system safety. It is recom mended that you thoroughly familiarize yourself with the safety precautions in this chapter before installing and servicing the chassis. Chapter 3 System Interface Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system.

Chapter 4 Chassis Setup and Maintenance Follow the procedures given in this chapter when installing and removing compo nents, or reconfiguring your chassis. Chapter 5 Rack Installation Refer to this chapter for instructions to install the chassis into a rack. Follow the procedures given in this chapter when installing, removing or reconfiguring your chassis in a rack environment. Appendix A Chassis Cables Appendix B Power Supply Specifications Appendix C SAS-810TQ Backplane Specifications Appendix D SATA-810 Backplane Specifications Note: For information on the CSE-SCA-004 SCSI backplane contact Supermicro's Technical Support department at www.supermicro.com. iv

Page 4