Chapter 2 Rack Installation 2.2 Installing the Rails There are a variety of racks on the market, that may require a slightly different assembly procedure. The following is a basic guideline for installing the system into a rack with the hardware provided. You should also refer to the installation instructions that came with the specific rack you are using. Do not use a two post "telco" type rack. This rail set fits a rack between 28" and 33" deep. Identifying the Rails The chassis package includes two rail assemblies. Each assembly consists of three sections:
An inner rail that secures directly to the chassis, an outer rail that secures to the rack, and a middle rail which extends from the outer rail. Outer Rail (This side faces outward) Inner Rail Middle Rail Release Lever Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rail 17