Super Micro Computer, Inc. SC825 — 4-3 Control Panel LEDs

SC825 Chassis Manual 4-2 Control Panel Buttons There are two push-buttons located on the front of the chassis. These are (in order from left to right) a reset button and a power on/off button. Reset: The reset button is used to reboot the system. Power: The main power switch is used to apply or remove power from the power supply to the server system. Turning off system power with this button removes the main power but keeps standby power supplied to the system. Therefore, you must unplug system before servicing. 4-3 Control Panel LEDs The control panel located on the front of the SC825 chassis has six LEDs.

These LEDs provide you with critical information related to different parts of the system. This section explains what each LED indicates when illuminated and any correc­ tive action you may need to take. ! Power Failure: When this LED flashes, it indicates a power failure in the power supply. Information LED: See the following table for the status shown by this LED. 4-2