Super Micro Computer, Inc. SC825 — 5-9 Installing the Air Shroud

Chapter 5: Chassis Setup and Maintenance 5-9 Installing the Air Shroud Figure 5-16. Air Shroud for SC825LP Chassis Air shrouds concentrate airflow to maximize fan efficiency. The SC825 chassis air shroud does not require screws to set up. Installing the Air Shroud 1. Confirm that your air shroud matches your chassis model. Each shroud is labeled SC825LP or SC825U, 2. Power down the system and remove the power cords from the rear of the power supply. Open the chassis cover as described in Section 5-3. 3. Place air shroud in the chassis. The air shroud fits behind the two fans closest to the power supply.

Note that if a 16 DIMM (13.68" x 13") motherboard is used, it is necessary to use the optional MCP-310-82502-0N air shroud. For ordering information, visit the Supermicro website at www.supermicro.com and click on the Where to Buy link. 5-19