SC825 Chassis Manual Release Tab Figure 5-20. Removing the Power Supply 1. If your chassis includes a redundant power supply (at least two power mod ules), you can leave the server running and remove only one power supply. If your server has only one power supply, you must power-down the server and unplug the power cord before replacing the power supply. Replacing the Power Supply 2. Push the release tab (on the back of the power supply) as illustrated. 3. Pull the power supply out using the handle provided. 4. Replace the failed power module with the same model. 5. Push the new power supply module into the power bay until you hear a click. 6.
Plug the AC power cord back into the module and power up the server. 5-24