SC825 Chassis Manual 6-4 Installing the System into a Rack This section provides information on installing the server into a rack unit with the rack rails provided. There are a variety of rack units on the market, so the assembly procedure may differ slightly. Refer to the installation instructions that came with your rack. Note: This rail will fit a rack between 26.8" and 36.4" deep. Identifying the Sections of the Rack Rails The chassis package includes two rail assemblies. Each assembly consists of three sections: An inner rail that secures directly to the chassis, an outer rail that secures to the rack, and a middle rail which extends from the outer rail.
These assemblies are specifically designed for the left and right side of the chassis. Rail Assembly (Shown with Rails Retracted) Outer Rail Middle Rail Locking Tab This Side Faces Outward Inner Rail Figure 6-1. Identifying the Outer Rail, Middle Rail and Inner Rail (Left Rail Assembly Shown) 6-4