Super Micro Computer, Inc. SC825 — Appendix C BPN-SAS3-825TQ Backplane Specifications

SC825 Chassis Manual C-5 Rear Connector Definitions 1. Backplane Main Power Connectors The 4-pin connectors, designated JP10, and JP13 provide power to the backplane. 2. CD/Floppy Drive Pin Connectors Pin connectors designated J17 and J18, provide power to the CD and floppy drives. See the table on the right for pin definitions. 3. Activity LED Headers The activity LED header, designated JP26 is used to indicate the activity status of each SAS drive. The activity LED header is located on the front panel. For the activity lead header to work properly, connect to it using a 10-pin LED cable. This is only used when the activity LED is not supported by the hard drive. 4, 5.

I 2 C Connectors The I 2 C connectors, designated JP44 and JP45, are used to monitor the HDD activity and status. D-4 Main Power 4-Pin Connector Pin# Definition 1 +12V 2 and 3 Ground 4 +5V CD/FDD Power 4-Pin Connector Pin# Definition 1 +5V 2 and 3 Ground 4 +12V SAS Activity LED Header Pin Definitions Pin # Definition Pin # Definition 1 ACT IN#0 6 ACT IN#4 2 ACT IN#1 7 ACT IN#5 3 ACT IN#2 8 ACT IN#6 4 ACT IN#3 9 ACT IN#7 5 Ground 10 Empty I2C Connector Pin Definitions Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection