Supermicro SC825M(B) — Supermicro SC825M(B) Chassis Manual: 2U Short-Depth Server Rack System

Chapter 5: Chassis Setup and Maintenance Chapter 5 Chassis Setup and Maintenance 5-1 Overview This chapter covers the steps required to install components and perform mainte­ nance on the chassis. The only tools required are a Phillips screwdriver and, for a few tasks, a hex wrench. 5-2 Removing Power from the System Before performing some setup or maintenance tasks, use the following procedure to ensure that power has been removed from the system. 1. Use the operating system to power down the system, following the on-screen prompts. 2. After the system has completely shut-down, carefully grasp the head of the power cord and gently pull it out of the back of the power supply.

If your system has dual power supplies, remove the cords from both power supplies. 3. Disconnect the cord from the power strip or wall outlet. 5-1