Appendix C: BPN-SAS3-825MTQ Backplane Specifications C-5 Rear Connector and Pin Definitions 1. Main Power Connector The 4-pin connector, designated JP10, pro vides power to the backplane. 2. Sideband Connector The sideband connector is designated JP51. For SES-2 to work properly, you must connect an 8-pin sideband cable to JP51. 3. - 4. DVD-ROM 4-Pin Connectors The 4-pin connectors, designated J9 and J10, provide power to the DVD-ROM drive. 5. MG9071 Chip The MG9071 is an enclosure management chip. 6. MG9071 Upgrade Header The upgrade header, designated JP46, is for manufacturing purposes only. 7. - 9. SAS Ports The SAS ports are used to connect the drive cables.
The three ports are designated #0 - #2 and are compatible with SAS/SATA drives. C-3 Backplane Main Power 4-Pin Connector Pin# Definition 1 +12V 2 and 3 Ground 4 +5V Sideband Connector Pin # Definition Pin # Definition 2 SDataIn (SGPIO Data In) 1 N/C 4 SDataIn (SGPIO Data Out) 3 GND 6 GND 5 SLoad (SGPIO Load) 8 N/C 7 SClock (SGPIO Clock) CD-ROM/ FDD Power 4-Pin Connector Pin# Definition 1 +12V 2 and 3 Ground 4 +5V