Chapter 5: Chassis Setup and Maintenance Drive Tray Dummy Drive Figure 5-4: Chassis Drive Tray The drives are mounted in drive trays to simplify their installation and removal from the chassis. These trays also help promote proper airflow for the drive bays. ! Warning: Except for short periods of time while swapping hard drives, do not operate the server with the hard drives bays empty. 1 1 Figure 5-5: Removing Dummy Drive from Tray Installing a Drive into the Hard Drive Tray Remove the screws (2) holding the drive to the tray. 1. Remove the drive from the tray. 2. 5-5