Super Micro Computer, Inc. SC827 — Super Micro SC827 Chassis Manual PDF Download

Chapter 5: Chassis Setup and Maintenance 5-6 Installing and Replacing Adapter Cards Adapter cards provide hot-swappable functionality to the chassis. Spacer Plate Motherboard Adapter Card Drawer Five Screws Figure 5-13: Adapter Card Installation Remove the motherboard drawer from the chassis. 1. Removing the Adapter Card Disconnect the wiring, connecting the adapter card to the motherboard if any 2. is present. Remove the five screws securing the adapter card and the spacer plate to the 3. drawer and set them aside for later use. Remove the adapter card and spacer plate from the motherboard drawer. 4. Set the spacer plate aside for later use. 5.

Installing the Adapter Card Make sure the motherboard has been installed properly in the node drawer 1. before installing the adapter card Place the adapter card and spacer plate in the motherboard drawer, aligning 2. the holes in the spacer and the adapter card with the holes in the mother­ board drawer. Secure the adapter card and spacer plate to the motherboard drawer, using 3. the five M3 flathead screws which were previously set aside. Reconnect the wiring from the motherboard to the adapter card if necessary. 4. Return the motherboard drawer to the closed position in the chassis. 5. 5-13